Shop fox D3304 Instruction Sheet

Model D3304
Compact Super Heavy-Duty
Workbench Leg System
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz

Introduction

This Heavy-Duty Workbench Leg System features
square-column steel legs with adjustable foot
pads and steel cross braces for unparalleled
strength and stability.

Inventory

A. Leg ............................................... 4
B. Brace with Label............................... 2
C. Brace ............................................ 2
D. Adjustable Foot ................................ 4
E. Hex Bolt M12-1.75 x 25 ..................... 16
F.
Lock Washer 12MM .......................... 16
G. Flat Washer 12MM ........................... 16
Leg
Brace
with
Label
Figure 1. Completed leg assembly.

Specifications

• Size (without top) ....... 32"H x 26"W x 26"D
• Lower Shelf Depth ..........................
• Max. Weight Capacity ............... 4000 lbs.

Assembly

We recommend having an assistant hold the
pieces while you assemble the parts. Do not
final-tighten stand bolts until all components
have been assembled.
COPYRIGHT © AUGUST, 2016 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
#18308DN
All manuals and user guides at all-guides.com
Brace
Foot
⁄ "
3
4
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
To assemble workbench:
1. Attach legs to each side of each brace with
label, ensuring ledges point up. Each set of
pre-drilled holes is attached with a hex bolt,
lock washer, and flat washer (see Figure 2).
2. Attach remaining braces to legs (as shown
in Figure 2).
Figure 2. Completed leg assembly.
3. Final-tighten all bolts.
4. Install adjustable feet into bottom of
each leg. Once table top is installed, feet
can be further adjusted for stability (see
Figure 3).
Figure 3. Completed workbench.
x 16
Printed in China