Lumberjack PM1600 Instruction Manual

Electric paddle mixer

Advertisement

Quick Links

Electric Paddle
Mixer
PM1600
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PM1600 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lumberjack PM1600

  • Page 1 Electric Paddle Mixer PM1600 INSTRUCTION MANUAL...
  • Page 2 Electric Paddle Mixer PM1600 General Power Tool Safety Warnings WARNING Read all safety warnings and all the instructions before operation. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.
  • Page 3 Electric Paddle Mixer PM1600 NOTE The term “residual current device (RCD)” may be replaced by the term “ground fault circuit interrupter (GFCI)” or “earth leakage circuit breaker (ELCB)”. Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool.
  • Page 4 Electric Paddle Mixer PM1600 Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
  • Page 5 Electric Paddle Mixer PM1600 Model Number PM1600 Voltage 230V Power 1600w No Load Speeds 1: 0-500/min 2: 0-800/min 2-Speed Gearbox Gear Mixing Paddle Ø 140mm 120 Litre Max. Mixing Capacity Sound pressure level =87.6dB(A) Sound power level =98.6dB(A) Vibration = 3.187m/s 2.
  • Page 6 Electric Paddle Mixer PM1600 (13) DO NOT use the slide or movable mixing drum. (14) DO NOT start the mixer until the mixing tools is in the mixing drum or other drums. (15) DO NOT run the machine idle. (16) DO NOT take out the sample until the machine is has completely stopped.
  • Page 7 Electric Paddle Mixer PM1600 6. OPERATION SINGLE MIXING 1. Screw the mixing paddle into the end of the mixing shaft by rotating in a clockwise direction by hand (Fig.1). 2. Screw the mixing shaft into the collet at the base of the mixer housing (Fig.2).
  • Page 8 CE Declaration of Conformity We: Toolsave, Unit C, Mander Ind Est, Old Heath Rd, Wolverhampton, WV1 2RP Declare that the Product detailed below: Hand mixer Model: PM1600 Satisfies the requirement of the Council Directives: Machinery Directive 98/37/EC Electromagnetic Compatibility Directive 89/336/EEC...

Table of Contents