Related Manuals for Kett KD-446L
Summary of Contents for Kett KD-446L
- Page 1 SAFETY RULES MODEL KD-446L ELECTRIC SHEAR The KD-446L has a DOUBLE INSULATED power unit equipped with a 2 wire cord and 2 prong plug...
-
Page 2: General Safety Rules
When using electric tools basic safety precautions should always be followed to reduce the risk of fi re, electric shock, and personal injury, including the following: Read all instructions. Save these instructions. For KD-446L and all double insulated tools: When servicing, use only identical replacement parts. Guard Against Electric Shock Prevent body contact with grounded surfaces, for example: pipes, radiators, ranges, refrigerator enclosures. - Page 3 THE KETT TOOL COMPANY 5055 Madison Road, Cincinnati, Ohio 45227 (513) 271-0333 fax (513) 271-5318 www.kett-tool.com Component Motor Unit Model 253-59 Used on KD-440, KD-441, KD-442, KD-493 (obsolete), KD-1493, KD-446L&R, KD-495 (obsolete) and KD-1495 Shears KS-423, KS-424, KS-426 and KSV-432 Saws...
-
Page 4: Parts List
23) place the side knife (46-22L) into position in the the nose of the power unit. WARNING: THE KETT TOOL CO. CANNOT ASSUME RESPONSIBLITY FOR DAMAGE TO OR MALFUNCTION OF A KETT SHEAR HEAD USED IN COMBINATION WITH ANY DRILL OTHER THAN THOSE REGULARLY SUPPLIED BY US. -
Page 5: Functional Description
FUNCTIONAL DESCRIPTION Please read carefully all safety rules and operating instructions. The Model KD-446L Shear is recommended for CR sheet steel up to 18 gage. Secure work piece. To start cut, plade the material between the knives. Depress the trigger switch and guide shear into the work. Do not force it. Avoid double thicknesses of material which exceed the 18 gage recommended capacity.
Need help?
Do you have a question about the KD-446L and is the answer not in the manual?
Questions and answers