Targus DOCK520USZ Quick Start Manual

Download this manual

FOUR HEAD

HD DOCK

QUICK START GUIDE

410-3828-001A / DOCK520USZ

Contents

• Four Head HD Dock

• USB-C Cable

• AC Power adapter

• USB-C to USB-A adapter with Tether

Workstation Setup

1. Connect all peripheral devices to the docking station

2. Connect the Targus Universal Docking Station to your host device.

3. If your host device does not connect via USB-C, use the included USB-C to USB-A adapter as shown below.

Front of the

Adapter

Connection

Back of the Adapter

to laptop

Speciﬁcations

• 4 x HDMI port (HDMI 1.4b)

• 4 x USB 3.1 Gen 1 downstream ports (port marked with

• 1 x USB-C upstream port (USB 3.1 Gen 1, data transfer only)

• 1 x USB-C downstream port (USB 3.1 Gen 1, data transfer only)

• Gigabit Ethernet

• Audio In/Out ports (3.5mm headset connector)

• Security lock slot

• USB-C cable

• USB-C to USB-A adapter with Tether

• LED Power Indicator

• Power ON/OFF button

• VESA mounting bracket holes

Features and speciﬁcations are subject to change without notice. Microsoft

and Windows are registered trademarks of Microsoft Corporation in the United

States and/or other countries. All trademarks and registered trademarks are

Street, Anaheim, CA 92806

Attach to

DOCK520

supports BC 1.2 and iOS device charging at 2.4A max)

Page 1 Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. All trademarks and registered trademarks are • USB-C Cable the property of their respective owners. ©2018 Targus, 1211 North Miller • AC Power adapter Street, Anaheim, CA 92806 •...
Page 2 The DisplayLink USB Graphics devices can also be conﬁgured This device complies with Part 15 of the FCC Rules. Operation In the event that the Targus product has a defect in materials or to be the main display. is subject to the following two conditions: (1) This device may...