Sunsky EA1200 Fast Operation Manual

Status LED

Data LED

· The Status LED indicates the communication status with PC, when flash quickly, it
INDICATE LED
· When the Data LED light, it stands receiving data from keypad
·
·
BASE STATION
CONNECTION
·
·
·
RADIO
CHANNEL SET
·
BASE STATION
TEST
EA1200 FAST OPERATION MANUL
stands that it received the data from PC.
Connect the base station with PC USB port , the Status LED will flash every half
second if connection is successful.
The Status LED will flash quickly after the software and base station communicate
normally.
Initial installation, PC will automatically remind that have found new device and
install the drive automatically.
After logging in application software, choose the new channel in the "channel" of
"base station set", then click "set".
When using the multiple base station solution, the frequency channel of each base
station should be different, and it's better not to set the neighboring channel
Only when frequency channel is interfered or communication is not good, then you
need to consider changing and resetting the channel, usually you needn't.
After connetion is ok, power on keypads, then do keypads testing.
USB Port