Canon PowerShot S95 User Manual page 157

Changing the Start-up Screen
You can change the start-up screen that appears when you turn on the
camera.
Registering Recorded Images as the Start-up
Screen
When you press the 1 button and set the camera to Playback mode, you can
register an image.
Any previously registered start-up image will be overwritten when
registering a new start-up image.
●
Choose [Start-up Image], then press the
m button.
Press the qr buttons or turn the Ê dial to
●
choose an option.
No start-up image
1, 2 Preset images (cannot be modified)
Preset images
3 You can set recorded images, and use the
included software to change the images.
●
Choose [Start-up Image], then press the
m button.
● Press the qr buttons or turn the Ê dial to
choose [3], then press the m button.
Press the qr buttons or turn the Ê dial to
●
choose an image, then press the m
button.
Press the qr buttons or turn the Ê dial to
●
choose [OK], then press the m button to
complete registration.
Changing Camera Settings
157