ThunderX3 TM40 User Manual

4 DPI segment
With 4 Different colors
Chapter One : Interface
Information Window
Displays current
settings on this mouse
Save as
Save settings
Load File
Load saved settings
Restore
Restore current profile
only
Chapter Two : Button
TM40
THUNDERX3 User Manual
Braided Cable
1
3
Main functions
1
16.8 Million Colors
Avago 9800 Chipset
MAX 16000 DPI
Profile Selection
Save up to 3 profiles
Apply
Confirmation of change
Reset All
Reset all profiles
2
2
4
Actions
2
1
2
3
Side Keys

Function: Mouse Event

1. Select from one of the three profiles
2. Click "Button"
3. Select a main function.
For example：Mouse Event
4. Choose an action for that function.
For example：Mouse Left Click
Click an action and drag the action box
to a key of your preference.
※To reselect or cancel, press the right
mouse click.
Press left mouse click to swap to the new
action.
Click "Apply" to confirm the change.
You can repeat the steps to assign other
fuctions or actions for other keys.
Function: Keyboard Event (to execute a
keyboard action with a mouse click)
1. Select "Keyboard Event"
2. Choose a preset action from the list or
record your own.
Double click on
"Double Click Start Recording Hotkey"
Type in a key for a combination of keys.
For example: an "A" or "Ctrl+__(any letter)"
Keys that can be recorded are shown below
(1) F1~F12
(2) Shift
(3) Ctrl
(4) Ctrl+
(5) Win
(6) Alt
(7) Number key
(8) Word key
Click the action and drag the action box
to a key of your preference.
Press left mouse click to swap to the new
action.
Click "Apply" to confirm the change.
※To reselect or cancel, press the right
mouse click.

Function: Fire key

1. Select "Fire Key"
2. Assign fire key position/s
3. Assign a keystroke action to the mouse
4. Set the repeat times per mouse click
5. Set the delay time between each click
2
4
2
5
2
Click the action and drag the action box
to a key of your preference.
Action Window
Choose and assign
an action
Language Selection
Choose a language
ThunderX3 Website
Hyperlink to official
website