Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Maykke WHA1000101
- Page 1 Installation and Warranty Guide Bathroom Exhaust Fan...
- Page 2 5. If unit is to be installed over a tub or shower, it must be marked as appropriate for the application and be connected to a GFCI(ground fault circuit interrupter) protected branch circuit. 6. Never place a switch where it can be reached from a tub or shower. www.maykke.com INSTALLATION AND CARE GUIDE REV.10152018...
- Page 3 The louver can be installed when the finished ceiling has been completed. Place the louver’s torsion spring mounting clips into the slot holes on both sides of the fan unit and press it closed. www.maykke.com INSTALLATION AND CARE GUIDE REV.10152018...
- Page 4 3. Using a soft cloth and dampened with mild detergent to remove any dirt or dust build- up from the unit and wipe to dry. 4. After cleaning, replace the louver and confirm that fan has been reassembled correctly. www.maykke.com INSTALLATION AND CARE GUIDE REV.10152018...
- Page 5 (RPM) WHA1000101 Exhaust Fan 9.37 Static pressure at 0.1 inches of water. Specifications are based on HVI standard. For warranty information please check www.maykke.com. For customer service concerns please call: 877.659.2858 or email: support@maykke.com www.maykke.com INSTALLATION AND CARE GUIDE REV.10152018...
Need help?
Do you have a question about the WHA1000101 and is the answer not in the manual?
Questions and answers