Advertisement
Advertisement
Table of Contents
Summary of Contents for Torc Blinc Mini Generation II
- Page 2 AVRCP Stereo music player remote control (Audio Video Remote Control Profile)
- Page 3 To turn the headset on Connect the charger to the headset.The charging time is approximately 4 hours. During charging, the indicator shows a steady red light or with flashing.When the battery is fully charged, the indicator red light will switches off. When you using the headset, if you hear a cadent tone, and the indicator red light flashes rhythmically, this indicates that the battery needs recharging.
- Page 4 Example of Headsets Set-Up from Iphone4s. ① Input the PIN code, the code is “0000”, Open the “Settings” Function and click “Pair” command. ② “Connected” will display after paired. Follow Further Instruction per your manual of phone Choose “Bluetooth” Function ③...
- Page 5 Passenger Driver Driver Driver Passenger...
- Page 6 Last Number Redial When the headset is idle, press and holds the Multi-Function Button (MFB) on the helmet for approx 3 seconds, then release the MFB will redial the last called phone number. Mobile Phone Function Figure 5...
- Page 7 System Reset If you need to replace the Bluetooth® Control Unit, please follow the instructions here. Push the reset button once to reset the system(Figure 7). First open the Shell’s cover (Figure 6), you will see the exposed Bluetooth® Control Unit (Figure 7).
Need help?
Do you have a question about the Blinc Mini Generation II and is the answer not in the manual?
Questions and answers