Setting Sound Parameters - Sony STR-LSA1 Operating Instructions Manual

?/1
Jog dial
Brief descriptions of buttons and controls
used to adjust the sound
JOG MENU button: Press repeatedly to select Sound
Menu.
Jog dial: After pressing the JOG MENU button, rotate to
select a submenu, preset equalizer setting, or parameter.
ENTER button: Press to enter a setting made using the
jog dial.
– +
N X
. >
N X
MID +/–
. >
+ +
BASS +/–
– –
Brief descriptions of buttons on the
remote used to adjust the sound
BASS +/– buttons: Press repeatedly to adjust the bass
level of the selected equalizer setting.
MID +/– buttons: Press repeatedly to adjust the
midrange level of the selected equalizer setting.
TREBLE +/– buttons: Press repeatedly to adjust the treble
level of the selected equalizer setting.
EQ BANK button: Press repeatedly to select the equalizer
setting.
JOG MENU
i
I
ENTER
?/1
+
–
x
+
–
x
TREBLE +/–
+
EQ BANK
–

Setting Sound Parameters

Do the procedure below to select a preset equalizer
setting, set the parameters of the equalizer settings, store
adjusted equalizer parameters, and adjust the speaker
balance.
Selecting an equalizer setting
1
Press JOG MENU repeatedly until "Sound Menu"
appears in the display.
2
Press ENTER.
"EQ BANK" appears in the display.
3
Press ENTER and rotate the jog dial to select the
equalizer setting.
The selected equalizer setting is automatically applied
and the normal display reappears after several
seconds.
z
You can use the remote to select the equalizer setting
Press EQ BANK repeatedly.
Setting the equalizer parameters
(EQ1 to 5)
1
Do steps 1 to 3 in "Selecting an equalizer setting"
on this page to select the equalizer setting to be
adjusted.
The parameters can be set only for the equalizer
settings stored in EQ1 to 5. The parameters stored in
Parametric EQ1 to 3 and EQ FLAT cannot be changed
on this receiver.
2
Press JOG MENU repeatedly until "Sound Menu"
appears in the display.
3
Rotate the jog dial until "EQ Control" appears in
the display.
"EQ Control" doesn't appear if a setting stored in
Parametric EQ1 to 3 or EQ FLAT has been selected.
4
Press ENTER and rotate the jog dial to select the
parameter to be set.
Select To adjust the
BASS Bass setting
MID Midrange setting
TREBLE Treble setting
15 GB