Advertisement
Select a "Network Mode" (Infrastructure or Ad-Hoc) and "SSID". You do not need to
change the default settings of "Power Save Mode" and "Roaming Optimization"
unless there is a special need to do so. Refer below for further explanation of each
mode.
Reference
Network Mode
Infrastructure: You will need an 802.11a/g Access Point to use the device in Infrastructure
mode. Because all communication will be done via the Access Point, the Access Point's
SSID must be used.
Ad-Hoc: In Ad-Hoc mode communication is made peer-to-peer between the client PCs and
without the use of an Access Point. All PCs communicating in an Ad-Hoc should use the
same SSID (whatever your choice is).
SSID: The SSID is a group name used by users of a common wireless network. Only those
devices using the same SSID are able to access each other. Also, you must use the same
SSID as the Access Point you want to connect with.
14
Advertisement
