Table of Contents
Advertisement
5-3-3 UMC Common Options
Parameter
UMC Common Options
DDR4 Common Options
Description
Press [Enter] for more options.
Enforce POR
Š
– Press [Enter] to configure the enforcement of Plan Of Record
(POR) which enables / disables restrictions for DDR4 frequency
and voltage programming. Memory speeds will be capped at AMD
guidelines.
– To enable 2 DIMMS per Channel at 3200MHz function, select
Accept at warning message, switch Overclock from Auto to
Enabled, and then set memory speed to 3200Mhz.
DRAM Controller Configuration
Š
– Press [Enter] to configure DRAM controller options.
• DRAM Power Options
• Cmd2T
• Gear Down Mode
CAD Bus Configuration
Š
– Press [Enter] to configure CAD Bus options.
• CAD Bus Timing User Controls
• CAD Bus Drive Strength User Controls
Data Bus configuration
Š
– Press [Enter] to configure Data Bus options.
- 105 -
BIOS Setup
Advertisement
Table of Contents
