Philips 22PFL4505D/F7 Software Upgrade page 2

6. If the update does not automatically
start, press the power button on the
remote or on the set keyboard. Do
not unplug the TV or send a
remote command to the TV
the update is in progress as this will
damage the TV.
The following screens will appear during the
update process.
4. Insert the USB drive into the set.
5. Plug the set into the AC outlet.
while
7. When the Software Upgrade is complete, the
screen to the left will appear. Press the power
button twice to turn the set off.
Note: When this screen appears, be carful not
Note: When this screen appears, be carful not
to press any button on the remote
to press any button on the remote
except the power button.
except the power button.
It will be necessary re-run auto-programming
It will be necessary re-run auto-programming
af ter inst alling this sof
af ter inst alling this sof
tware.
tware.