Welcome Congratulations on choosing to buy a Stirling appliance. ® All appliances brought to you by Stirling are manufactured to the highest ® standards of performance and safety and as part of our philosophy of customer service and satisfaction are backed by our comprehensive 12 month warranty.
General Information & Safety Instructions Product Overview Getting Started Instructions Cleaning and Maintenance Storage Frequently Asked Questions Repair and Refurbished Goods or Parts Notice Other Useful Information AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021 YEAR WARRANTY...
Do not expose the appliance to high heat, sparks and open flames. Electrical Safety and Cord Handling Read all instructions before using the Stirling® 1.5L Ice Cube Maker. Before turning on the Ice Cube Maker ensure the electrical voltage and frequency of the circuit corresponds to those indicated on the rating label of the product.
Page 6
15. Do not immerse the Ice Cube Maker into water or any other liquid as this may cause an electrical shock. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
Page 7
14. Keep the Ice Cube Maker away from all substances that may cause ignition. 15. Do not position the Ice Cube Maker in a damp place or anywhere it may come in contact with water. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
Page 8
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
11. Power Cord Control Panel 12. Ice Scoop Main Unit 13. Removable Ice Basket Drain Plug Included (not pictured): Instruction Manual, Quick Start Guide and Warranty Certificate. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
Page 10
Press once to turn the Ice Cube Maker ON. The ICE MAKING indicator light will fully illuminate (green). Press again to return the Ice Cube Maker to standby mode. The ICE MAKING indicator light will flash (green). AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
WARNING: Never immerse the Ice Cube Maker in water or any other liquids. WARNING: Keep all the Ice Cube Maker vents and the ventilation clearance around the Ice Cube Maker clear of obstructions at all times. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
WATER indicator light will flash (red). The Ice Cube Maker will cease making ice and return to standby mode and the ICE MAKING indicator light will flash (green). AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
Page 13
(green). Open the cover and remove the ice using the scoop (included). Once the ice has been removed, the Ice Cube Fig. 3 Maker will resume making ice (Fig. 3). AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
Page 14
Ice Cube Maker should be switched off and unplugged from the power outlet. Allow the Ice Cube Maker to cool down for at least 2 hours before using again. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
Page 15
24 hours to ensure the cleanliness and freshness of the ice. WARNING: Never remove the drain plug unless the Ice Cube Maker is switched off, unplugged from the power outlet and is positioned over a sink. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
CAUTION: This appliance is heavy, take care when moving it. To avoid back or other injury, consider a two person lift when moving it or draining the water reservoir. Failure to do so can result in back or other injury. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
NOTE: It is recommended to store the Ice Cube Maker in its original carton with all packaging materials. It will help prevent any damage if the product needs to be transported in the future. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
Ice Cube Maker to the standby mode. Add water to the flashing (red)? water reservoir inside the Ice Cube Maker. Please refer to the instructions on page 12 for how to fill the water reservoir. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
Page 19
• The solenoid (an internal component), may be broken. Please is turned ON but the contact the After Sales Support line for further advice. water is warm? AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
Page 20
5 minutes. If the Ice Cube and is in standby Maker does not automatically restart after 5 minutes, contact mode? the After Sales Support line for further advice. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: IA3833 PRODUCT CODE: 707199 12/2021...
Need help?
Do you have a question about the IA3833 and is the answer not in the manual?
Questions and answers