Advertisement
Quick Links
Specifications for part no: PTM-02
Power Requirements
5VDC @ 1ma, obtained from T6 equipment via data port cable, power is
sent from module on to the panel display.
Physical
Size
3.0" (76mm) x 1.6" (41mm) x .89" (23mm)
Weight
1 oz. (28 grams)
°
Temp
0 - 140
F, 90% r. humidity (non cond.)
Origin
Designed and assembled in the USA.
Performance
Memory
32kb (4k x 8) serial EEprom holds 1 program
data retention of 10 years minimum
Speed
Data transfer < 2 seconds
Data Port
IIc bus @100khz, red = +5vdc, black = neg
yellow= clock, green= data
T6
is a trade name of Trol Systems Inc.
All references to computer systems, software, product or company names are trademarks or trade names of
their respective holders. TSI reserves the right to make changes to software, hardware and/or information
contained in this manual without notice.
©
publication T6PTM- rev:1
|
2001 TSI All rights reserved | printed in USA
Program
Transfer
Module
Instruction booklet for part number:
PTM-02
Advertisement
Summary of Contents for T6 PTM-02
- Page 1 Specifications for part no: PTM-02 Program Power Requirements 5VDC @ 1ma, obtained from T6 equipment via data port cable, power is Transfer sent from module on to the panel display. Module Physical Size 3.0” (76mm) x 1.6” (41mm) x .89” (23mm) Weight 1 oz.
- Page 2 T6 MCUs or as a computer interface. 2a. The panel display should be indicating the number of timers/counters The PTM is plugged into the data port of the T6 panel display. The PTM and that are setup. Confirm that this information is correct before proceeding.