Subscribe to Our Youtube Channel
Related Manuals for EK LGA-4189
Summary of Contents for EK LGA-4189
- Page 1 EK-Pro CPU Water Block LGA-4189 N-ILM NI + POM-C | N-ILM AL + POM-C | N-ILM RACK NI + POM-C | N-ILM RACK AL + POM-C USER GUIDE...
- Page 2 This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no liability whatsoever, expressed or implied, for the use of these products nor their installation.
-
Page 3: Table Of Contents
TABLE OF CONTENTS GENERAL INFORMATION ON WATER BLOCK COMPATIBILITY BOX CONTENTS TECHNICAL SPECIFICATIONS AND PRODUCT PARTS INSTALLING THE WATER BLOCK CLEANING THE CPU ATTACHING THE PROCESSOR CARRIER TO THE WATER BLOCK INSTALLING THE WATER BLOCK ASSEMBLY INSTALLING THE FITTINGS TESTING THE LOOP SUPPORT AND SERVICE SOCIAL MEDIA - 3 -... -
Page 4: General Information On Water Block Compatibility
GENERAL INFORMATION ON WATER BLOCK COMPATIBILITY This CPU liquid cooling unit is pre-assembled for use with modern Intel server socket-type motherboards. By default (out of the box), this water block supports the following CPU sockets: - Intel® Socket LGA-4189 - 4 -... -
Page 5: Box Contents
BOX CONTENTS Mounting Mechanism EAN: 3831109849019 EK-TIM Ectotherm (1g) EK-Loop Multi Allen Key (6 mm, 8 mm, 9 mm) (1 pc) EK-Pro CPU Water Block LGA-4189 Allen Key 5 mm (1 pc) Torx T30 (1 pc) - 5 -... -
Page 6: Technical Specifications And Product Parts
TECHNICAL SPECIFICATIONS AND PRODUCT PARTS The following items are enclosed with each EK-Pro LGA-4189 water block, depending on the version: EK-Pro LGA-4189 CPU water block 3831109844724 Ni + POM-C: Position EAN Description Quantity 103677 TOP - Cover Annihilator LGA4189 103759... - Page 7 TOP - PA66 EK Annihilator Pro Rack 100442 O-ring 66 x 2 mm EPDM70 103089 M3 x 5 ISO 14581 Screw 103679 Annihilator Pro Jet 3831109848715 EK - Mounting Plate Pro CPU WB LGA4189 103672 Coldplate Al 3831109844717 Al rack + POM-C: Position EAN Description Quantity...
-
Page 8: Installing The Water Block
INSTALLING THE WATER BLOCK STEP 1 CLEANING THE CPU EK-PRO WB Wipe the CPU’s contact surface (by using non–abrasive cloth or Q-tip). Applying thermal compound: on a clean IHS, apply a line of thermal compound and spread it over the whole CPU heat spreader PROCESSOR CARRIER (IHS) with a credit card or equivalent. -
Page 9: Installing The Water Block Assembly
PIN 1 corners on the LATCH MECHANISM processor carrier and the socket. Lower the water block onto the LGA-4189 socket integrated latch mechanism (ILM). Press the latches into the locked position to level the water block and ensure even contact across the whole CPU. -
Page 10: Installing The Fittings
Carefully identify the direction of the flow in your circuit. For the INLET non-rack version, EK recommends the use of EK-HFB 10 mm barb fittings and EK-Tube ZMT 10/16 mm Matte Black tubing. For the rack BARB OUTLET version, EK-HFB Fitting 6 mm G1/8 and EK-Tube ZMT 6/9mm Matte Black tubing is recommended. -
Page 11: Testing The Loop
TESTING THE LOOP To ensure the installation of EK components was successful, we recommend you perform a 24-hour leak test. When your loop is complete and filled with coolant, connect the pump to a PSU outside your system. Do not connect power to any of the other components. -
Page 12: Support And Service
SPECIFICATIONS AND PRODUCT PARTS” where you can find the EAN number of each part you might need. Include the EAN number with quantity in your request. Mounting Mechanism EAN can be found under “BOX CONTENTS”. Thermal pads are readily available in the EK shop. SOCIAL MEDIA EKWaterBlocks @EKWaterBlocks...
Need help?
Do you have a question about the LGA-4189 and is the answer not in the manual?
Questions and answers