Understanding The Multi-Channel Surround Displays - Sony STR-DE475 Operating Instructions Manual

Understanding the Multi-Channel Surround Displays

L
L F E
SL S SR
8
1 ; DIGITAL
This indicator lights up when the unit is decoding
signals recorded in the Dolby Digital format.
2 PRO LOGIC
Lights up when the receiver applies Pro Logic
processing to two channel signals in order to output
the center and surround channel signals.*
* However, this indicator does not light if the center and surround
speakers are set to "NO", and the A.F.D. or NORMAL
SURROUND sound fields are selected.
3 DTS
Lights up when DTS signals are input.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT MODE
is NOT set to ANALOG (see qa on page 22).
4 Tuner indicators
These indicators light up when using the receiver to
tune in radio stations, etc. See pages 34 – 39 for tuner
operations.
5 D. RANGE
Lights up when dynamic range compression is active.
See page 32 to adjust the dynamic range compression.
6 COAX
Lights up when the source signal is a digital signal
being input through the COAX terminal.
28 GB
0 1 2
a
DIGITAL PRO LOGIC
SP. OFF OPT COAX
C R
7 6
9
3 4
DTS STEREO MONO RDS
D.RANGE TA NEWS INFO
5
7 OPT
Lights up when the source signal is a digital signal
being input through the OPT terminal.
8 Play back channel indicators
The letters light up to indicate the channels being
played back.
L: Front Left
C: Center (monaural)
SR: Surround Right
S: Surround (monaural or the surround components
obtained by Pro Logic processing)
The boxes around the letters light up to indicate the
speakers used to playback the channels.
See the next page for details regarding the playback
channel indicators.
9 L F E
L F E will light up when the disc being played
contains the LFE (Low Frequency Effect) channel and
when the sound of the LFE channel signal is actually
being reproduced.
0 SP. OFF
Lights up when headphone is inserted.
MEMORY
R: Front Right
SL: Surround Left