Subscribe to Our Youtube Channel
Summary of Contents for Techno CNC Systems Patriot
- Page 1 TechnoCNC Patriot Door Lock Troubleshooting Applies to Control Interface version 1.421 and above. Version 4 April 2011...
- Page 2 Door Locked Always On Introduction The Patriot door locking mechanism was designed to prevent unsafe machine operation. When set up correctly, pressing the “Door” button on the interface will unlatch the door, but it won't open automatically. You have to first release the latch, by pressing down on the door handle. You should hear the latch click away, and the door will open by lifting on the handle.
- Page 3 Explanation of Tools Software Requirements The first step is to make sure you have appropriate software. The TechnoCNC Control Interface that this document references is version 1.421. Anything later than that (1.422) will work just fine. You can download the latest version at technorouters.com (click on Control Interface in the menu to the left). Diagnostics The tool you'll use to help diagnose the problem can be found under Setup ->...
- Page 4 Diagnosing Steps While there are multiple causes of these errors, some causes are more common than others. 1. Setup Procedure The procedure for detecting the interlock can be difficult to follow if you're in a rush. Be sure to read all the prompts, and follow the instructions properly.
- Page 5 properly seated, you should be able to close the door easily, even if the lock is in the locked position. The door will simply push the lock out of the way as it closes. Try the interlock setup again. While the procedures above may not fix the problem, it's critical that the lock assembly be properly mounted because sensor adjustment relies on it.
- Page 6 an error, there are a few more possibilities that need checking. If it passes, verify the Door button on the front interface properly disables the latch, and that pushing down on the door releases the latch and allows the door to open. If you have Auto Relatch enabled, pushing the door closed will automatically engage the door latch.
Need help?
Do you have a question about the Patriot and is the answer not in the manual?
Questions and answers