Advertisement
7
SET INCLUDES
x1
x4
x2
x4
D
E
F
x4
x4
H
H
H
1
2
M4
M4
x4
x4
H
H
I
7
8
M8
M8
Using a screwdriver tighten the securing
bolts onto the mount.
x4
x1
x1
G
x4
x4
x4
H
H
3
4
5
M5
M5
M6
x4
x4
I
1
2
Tilt & turn
TV wall mount
x4
H
6
M6
Whilst every effort has been made to ensure that the provided screws are suitable for connecting the mount to the vast majority of
TV brands and models, Ross cannot be held responsible on the rare occasion that the supplied screws are not sufficient.
Contact us for more information at help@ross.co.uk
LN2SA200
Easy installation:
Scan for installation video
For more information visit:
www.ross.uk
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ross neo
Summary of Contents for Ross neo
- Page 1 Whilst every effort has been made to ensure that the provided screws are suitable for connecting the mount to the vast majority of TV brands and models, Ross cannot be held responsible on the rare occasion that the supplied screws are not sufficient.
- Page 2 Clip the covers (G) onto the base of the unit. Using the Provided select the appropriate ones to hold the When selecting the position of the TV mount ensure that it is fixed onto a wooden joist or onto a solid provided Allen key (D) tighten the up the two angling hooks (H) onto the TV.
Need help?
Do you have a question about the neo and is the answer not in the manual?
Questions and answers
Instalación 100 x 200
The installation process for the Ross Neo TV wall mount (e.g., model LN2SA200) with dimensions 100 x 200 includes the following steps:
1. Select a suitable location and ensure the mount is fixed onto a wooden joist or solid wall.
2. Mark the wall at the fixing locations.
3. Use the appropriate screws and bolts included in the set to attach the mount to the wall.
4. Use a screwdriver to tighten the securing bolts onto the mount.
5. Attach the TV to the mount using the suitable screws provided (check for compatibility with your TV model).
6. Clip the covers (part G) onto the base of the unit to finish the installation.
This answer is automatically generated