Advertisement
Advertisement
Table of Contents
Summary of Contents for I.Trek M3
- Page 1 Personal Navigation System User Manual Copyright 2005, www.itrekgps.com...
- Page 2 GPS Receiver Battery LED GPS LED Bluetooth LED Power On – Press power button 1 sec. until the LED is on. Off – Press power button 1 sec. until the LED is off. Bluetooth LED Flashing Slowly – No connection to Bluetooth device. Flashing Quickly –...
- Page 3 Setting up Your Bluetooth GPS The instruction is provided as a general guideline. The steps may be different on your particular device. Please refer to user manual of each device for more detailed information. Pocket PC * Make sure Bluetooth is enabled on the Pocket PC. Open Bluetooth Manager by clicking on Bluetooth Manager icon.
- Page 4 Below are some useful tips. Protocol The default protocol on i.Trek M3 Bluetooth GPS is NMEA and majority of the navigation software also uses NMEA as standard protocol. We recommend keeping this setting at default.
- Page 5 Technical Specifications Antenna Receiver Frequency: 1575.42 MHz (L1 band) C/A code Antenna Type: Built-in Active Antenna GPS Receiver Technology: SiRF star III Satellite Measure Used: 20-channel parallel automatic selection Tracking Sensitivity: -159 dBm Operating Temperature: -20°C to 60°C Battery Life: 15 hours with built-in rechargeable battery (1650 mAh) Time to First Fix (TTFF) Reacquisition:...
Need help?
Do you have a question about the M3 and is the answer not in the manual?
Questions and answers