Advertisement
It is IMPORTANT to follow the instructions. Prepare
yourself with all of the required tools and accessories,
read all of the Flexi Tips and refer to them when you see
this sign ❄. Precision mounting will maximise your Flexi
experience under extreme conditions.
L
K
N
F
VER070721
H
I
C
G
25mm
Balance Chord
MOUNTING INSTRUCTIONS FOR
PLATEAU SKI BINDINGS
drill with 3.6mm
Pozidriv #3 screwdriver
hammer
centre punch
Parts
J
2 x Base Plates (C)
2 x Strap Systems
2 x Mounting Plates (E)
2 x Heel Plates (F)
8 x 18mm screws (M)
2 x 15mm screw (N)
H
You will need
ski glue or 24-hour cure epoxy
fine marker pen
ruler
Reference
A. Balance Chord
B. Ruler
C. Base Plate
D. Flex Stem
E. Mounting Plate
F. Heel Plate
G. Buckles
H. Tensioning Loop
I. Release Cord
J. Grab Loop
K. Heel Retainer Loop
L. Heel Tab
M. Mounting Screws
N. Heel Screw
M
E
D
A
B
Made in Australia by
Advertisement
Table of Contents
Summary of Contents for flexi PLATEAU
- Page 1 You will need yourself with all of the required tools and accessories, drill with 3.6mm ski glue or 24-hour cure epoxy read all of the Flexi Tips and refer to them when you see Pozidriv #3 screwdriver fine marker pen hammer ruler this sign ❄.
- Page 2 To counter any rolling effect you can purchase the optional Flexi Ultima Shim Kit, available at icetrek.com. Screw heads can become damaged if using an electric driver at high speed or a poorly matched screwdriver or bit. Use a #3 Pozidriv hand driver to seat the screws.
Need help?
Do you have a question about the PLATEAU and is the answer not in the manual?
Questions and answers