Preventing the TV from toppling over
As a protective measure, secure the TV. If you fail to do so, the TV may topple over resulting in serious
injury.
When installing the TV on a rack
1
Place the TV on the center of the rack.
2
Fit the support belt (supplied) to the TV, then firmly fasten with the screw for the support
belt (+PSW4 × 20 mm) (supplied) using a screw driver.
3
Fasten the support belt to the rack with the wood screw for the support belt (M3.8 × 20
mm) (supplied).
Notes
• Be careful not to pinch your fingers when setting up the TV and rack.
• Install the rack after allowing for a space of less than 25 cm from the wall. The wall will prevent the TV from falling
from the rack even if the TV leans backward towards the wall.
18
GB
Screw for the support belt
(+PSW4 × 20 mm)
Wood screw for the support belt
(M3.8 × 20 mm)
Side view
Less than
25 cm