Sony DAV-X1 Operating Instructions Manual page 27

B To connect the S VIDEO OUT jack of other component to the S VIDEO
IN jack of this system
Connect a VCR or other component to the S VIDEO IN jack using an S video cord (not supplied).
Connecting the audio cords
The quality of the audio increases from
To connect the AUDIO OUT jacks of other component to the AUDIO
IN jacks of this system
Connect a VCR or other component to the AUDIO IN jacks using an video/audio cord (not supplied).
When connecting the cords, be sure to match the color-coded sleeves to the appropriate component
jacks.
To connect the COAXIAL DIGITAL OUT jack of a component to the
COAXIAL DIGITAL IN jack of this system
Connect the component to the COAXIAL DIGITAL IN jack using a coaxial digital cord (not supplied).
To connect the OPTICAL DIGITAL OUT jack of a component to the
OPTICAL DIGITAL IN jack of this system
Connect the component to the OPTICAL DIGITAL IN jack using a optical digital cord (not supplied).
Note
• Make sure that the connected jack combinations are correct; if you connect the audio cords to VIDEO 1/SAT 1
AUDIO IN, you should connect the video cord to VIDEO 1/SAT 1 VIDEO IN/S-VIDEO IN.
• When you connect to the VIDEO 1/SAT 1 OPTICAL or COAXIAL DIGITAL IN jack, set the switch on the rear
panel accordingly.
to ,
.
VIDEO 1 / SAT 1
OPTICAL COAXIAL
DIGITAL IN
White (L/Audio)
Red (R/Audio)
continued
27
GB