Sony DAV-SR1 Operating Instructions Manual page 79

xSP SETUP
CENTER SP
CENTER Y: Select this if you
(center
use a center speaker.
speaker)
CENTER N: Select this if no
center speaker is used.
SURR SP
SURR Y: Select this if you
(surround
use surround speakers.
speakers)
SURR N: Select this if no
surround speaker is used.
a)
SURR B SP
SURR B N: Select this if no
(surround
surround back speaker is
back
used.
speaker)
SURR B Y: Select this if you
use a surround back speaker.
F DIST
Front speaker distance from
(front
the listening position can be
distance)
set in 0.2 meter increments
b)
1.6m
from 1.0 to 7.0 meters.
c)
CEN DIST
Center speaker distance can
(center
be moved up to 1.6 meters
distance)
closer to the listening position
b)
1.6m
from the front speaker
distance, in 0.2 meter
increments.
c)
SURR DIST Surround speaker distance
(surround
can be moved up to 4.6 meters
distance)
closer to the listening position
b)
1.6m
from the front speaker
distance, in 0.2 meter
increments.
c)
SB DIST Surround back speaker
(surround
distance can be moved up to
back
4.6 meters closer to the
distance)
listening position from the
b)
1.6m
front speaker distance, in 0.2
meter increments.
c)
SP POS SP BEHIND: Select this if
(surround
surround speakers are located
speakers
in the back area of the
position)
listening position.
SP SIDE: Select this if
surround speakers are located
in the side area of the listening
position.
a)
This setting appears when you set "SURR SP"
to "SURR Y" in "SP SETUP."
b)
When you perform the Quick Setup (page 22),
the default settings are changed.
c)
This setting appears when you set the
corresponding speaker to "Y" in "SP SETUP"
(page 79).
xLEVEL
TEST TONE
T. TONE OFF: The test tone is
(test tone)
not emitted from the speakers.
T. TONE ON: The test tone is
emitted from both left and
right speakers simultaneously
while adjusting balance. When
you select one of the
"LEVEL" items, the test tone
is emitted from each speaker in
sequence.
F BALANCE Adjusts the balance between
(front
the front left and right
balance)
speakers. (You can adjust from
0
the center 6 steps left (L6) or
right (R6).)
b)
CEN LEVEL
Adjusts the level of the center
(center level)
speaker (–6 dB to +6 dB, 1 dB
a)
0
increments).
b)
SL LEVEL
Adjusts the left level of the
(surround
surround speaker (–6 dB to +6
left level)
dB, 1 dB increments).
a)
0
b)
SR LEVEL Adjusts the right level of the
(surround
surround speaker (–6 dB to +6
right level)
dB, 1 dB increments).
a)
0
b)
SB LEVEL
Adjusts the level of the
(surround
surround back speaker (–10
back level)
dB to +10 dB, 1 dB
a)
0
increments).
SW LEVEL
Adjusts the level of the
(subwoofer
subwoofer (–6 dB to +6 dB, 1
level)
dB increments).
a)
+4
AUDIO DRC DRC OFF: No compression of
(dynamic
DYNAMIC range.
compression)
DRC ON: Reproduces the
sound track with the kind of
DYNAMIC range that the
recording engineer intended.
a)
When you perform the Quick Setup (page 22),
the default settings are changed.
b)
This setting appears when you set the
corresponding speaker to "Y" in "SP SETUP"
(page 79).
continued
79 GB