Page 2
Safety Information: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Page 3
Installation For additional protection the installation of a residual current device (RCD) is recommended. ( Refer to local electrical regulations) Remove all packaging materials and check the appliance, supply cord and the plug (if fitted) for any signs of damage Pay attention to the mounting location and the material on to which the heater is being mounted.
Page 4
Basic Specifications S6001 Model Voltage (V) 220-240~ Power consumption (W) 900 to 2400 watts Dimensions L 470 X H200 X D126 Weight (kg) IP protection IP64 Figure 1: Mounting bracket and Figure 2: Connection from wall anchor wall plugs provided bracket to the infrared heater Figure 3: Min.
Page 5
Controls - Operation Hellos’ is very simple and safe to Model 6001 operate. Operation is controlled by touching the control handle with slight pressure to push the handle backwards. 1.To activate the heater the OFF/ON activation rocker switch located on the left side of the heater must be turned to ON position.
Page 6
Cleaning And Maintenance This appliance is constructed of a robust and maintenance-free aluminum casing. There are no user serviceable parts inside. Before cleaning remove the plug from the power outlet (if fitted) and wait until the appliance is sufficiently cool. Wipe the appliance only with clean and lint-free cloth or a soft brush.
Page 7
Contacts: HONG KONG Head Office - Serene Industries Limited t: +852 2325 3209 f: +852 2325 3166 info@serene-ind.com w: www.serene-ind.com Suite 1010, 10F, Block A, Alexander Industrial Building, 62 King Lam Street, Cheung Sha Wan, Kowloon Hong Kong SAR NEW ZEALAND t: (+) 64 (3) 344 5550 f: 0800 437 264- Freefax nzenquiry@serene-ind.com...
Need help?
Do you have a question about the Hellos and is the answer not in the manual?
Questions and answers