Deco Chef DCAIRD12BLK Owner's Manual page 13

Rotisserie Spit Assembly
1. Insert each Skewer point through holes on the left
Skewer Rack (fig. C).
2. Squeeze the clip-end of each Skewer as you insert
into the opposite Skewer Rack slot to secure.
3. Release clip to securely rest in slot as shown (fig.
D).
FIG.C-LEFT SIDE
Placing Rotisserie Spit or
Rotating Mesh Basket into
Unit
1. Insert the left side of the assembled Spit or Basket first
into the Rotisserie Shaft socket. Be sure the Rotisserie
Shaft is in place to engage rotation (fig. E).
2. Place the right side onto the hanger(fig. F).
Removing Rotisserie Spit or Rotating Basket from Unit
1. Open Unit door to pause cooking cycle or turn Unit off by
pressing the Power Button.
2. Insert Rotisserie Fetch tool beneath the Rotisserie Shaft
3. Lift the right side of the Rotisserie Fetch tool at a slight angle
to clear the bracket, then shift the right until the left side of
the
Shaft slides out of the Rotisserie
4. Carefully remove the rotisserie food from the air fryer
FINAL ASSEMBLY
4. Repeat process 3 through 6 in a uniform manner
around the Skewer Rack. Make sure Skewers are
evenly spaced.
5. Tighten the Set Screws to make sure they are
securely in place.
6. Use caution while inserting the Spit into the Unit to
prevent getting poked by the Skewer ends..
FIG. D - RIGHT SIDE
ABB. E - LEFT SIDE
14