Setup For System; Connecting Ac Power Cord - Sony DAV-S888 Operating Instructions Manual

FRONT
R
FRONT L
CENTER
REAR L
REAR
R
SPEAKER
If you connect a digital satellite receiver with the OPTICAL jack
The digital satellite receiver can be connected to the OPTICAL jack instead of the VIDEO IN
and AUDIO IN L/R jacks of the system.
The system can accept both the digital and analog signals. Digital signals have priority over
analog signals. If the digital signal ceases, the analog signal will be processed after 2 seconds.
If you connect a digital satellite receiver without the OPTICAL jack
Connect the digital satellite receiver to the VIDEO IN and AUDIO IN L/R jacks only of the
system.
Setup for the system (for Asian and Australian models)
Setup is necessary for the system, depending on the TV monitor to be connected.
The initial setting for Asian models is NTSC but Australian models is PAL.
If the color system of the TV is PAL*
To set the system to PAL, turn on the system by pressing 1 (power) on the remote while
pressing X (pause) button on the system. You need to hold the X button until DAV-S888
appears on the display. To reset to NTSC, turn off the system and then turn on again using the
remote while pressing the X button on the system.
* If the color system of the TV is NTSC, do the same operation above to set the system to
NTSC.
Connecting the AC power cords (mains leads)
Before connecting the AC power cords (mains leads) of the system and subwoofer to wall
outlets (mains), connect the speakers to the system.
Connect the AC power cord (mains lead) of your TV/video components to a wall outlet (mains).
SUB
WOOFER
IMPEDANCE
USE
WOOFER 3
AUDIO
EXCEPT
OUT
WOOFER 3
IN OUT
VIDEO VIDEO
IN OUT
AUDIO AUDIO
IN OUT
L
R
VCR
AUDIO OUT VIDEO OUT AUDIO IN
R L R
SCAN SELECT
AM
SELECTABLE
INTERLACE
COAXIAL
FM
R L
75
AUDIO IN VIDEO IN Y P
COMPONENT
VIDEO 1 COMPONENT VIDEO OUT
VIDEO OUT
OUT OUT
VIDEO
OUT
AUDIO
OUT
L OUTPUT
R
OPTICAL
Digital satellite receiver
VIDEO IN S VIDEO (DVD ONLY)
L
OPTICAL
DIGITAL
IN
/C P /C V I D E O
B B R R
VIDEO 2
MONITOR
OUT
IN
INPUT
VIDEO
IN
TV monitor
GB
23