Table of Contents
Advertisement
Fault
The programme does not
start.
The door cannot be opened. Rinse Hold
The water is not draining.
Cause
is activated.
The temperature is too high.
Water level is too high.
Power failure.
Drain pipe or water outlet
hose is blocked.
Drain pipe or water drain
hose is caught or jammed.
Drain pump is blocked.
Rinse Hold
is activated.
The water outlet hose is con-
nected too high.
Pump cover is not correctly
assembled.
Pump cover is not correctly
assembled.
Troubleshooting en
troubleshooting
Note: You can start the washing pro-
gramme if you deactivate the intelli-
gent dosing system and dose manu-
ally.
→ "Buttons", Page 26
Continue the programme by select-
▶
ing Spin or Drain and pressing
Έναρξη/Προσθήκη ρούχων
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 44
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 44
Start the Drain programme.
▶
Open the door using the emergency
▶
release.
→ "Emergency release", Page 69
Clean the drain pipe and the water
▶
outlet hose.
Ensure that the drain pipe and wa-
▶
ter drain hose are not kinked or
trapped.
→ "Cleaning the drain pump",
▶
Page 55
Continue the programme by select-
▶
ing Spin or Drain and pressing
Έναρξη/Προσθήκη ρούχων
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 44
Install the water outlet hose at a
▶
maximum height of 1 metre.
→ "Technical specifications",
Page 74
Correctly assemble the pump
▶
cover.
Correctly assemble the pump
▶
cover.
.
.
63
Advertisement
Table of Contents
