RANKIN EQUIPMENT LIMITED WARRANTY The Manufacturer warrants to original Purchaser that its product is free from major defects in material under normal use and service for a period of 180 days from the date the product is shown to have been placed into operation by original distributor custom- ers or for one year from date of shipment from Manufacturer's plant, whichever shall first occur.
EQUIPMENT SAFETY GUIDELINES 1. Safety of the operator and bystanders is one 6. This equipment is dangerous to children and of the main concerns in designing and devel- persons unfamiliar with its operation. The oping a machine. However, every year many operator should be a responsible, properly accidents occur which could have been trained and physically able person familiar...
SAFETY TRAINING SAFETY SIGNS 1. Keep safety signs clean and legible at all 1. Safety is a primary concern in the design and times. manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by a single careless act of an 2.
Page 10
PREPARATION 1. Never operate the tractor and machine until 4. Operate the machine only you have read and completely understand this with a tractor equipped with manual, the Tractor Operator's Manual, and an approved Roll-Over- each of the Safety Messages found on the Protective Structure (ROPS).
OPERATING SAFETY 1. Please remember it is important that you read 12. Use extra care when handling large round and heed the safety signs on the Loader and loads or other shiftable objects unless loader Forks. Clean or replace all safety signs if they and forks are equipped with an attachment cannot be clearly read and understood.
TRANSPORT SAFETY MAINTENANCE SAFETY 1. Good maintenance is your responsibility. 1. Comply with state and local laws governing Poor maintenance is an invitation to trouble. highway safety and movement of farm ma- chinery on public roads. 2. Follow good shop practices. 2.
HYDRAULIC SAFETY 2.10 STORAGE SAFETY 1. Make sure that all the components in the 1. Store the unit in an area away from human hydraulic system are kept in good condition activity. and are clean. 2. Do not permit children to play on or around 2.
2.11 SIGN-OFF FORM The Manufacturer follows the general Safety Standards specified by the American Society of Agricultural Engineers (ASAE) and the Occupational Safety and Health Administration (OSHA). Anyone who will be operating and/or maintaining the Loader Mounted Forks must read and clearly understand ALL Safety, Operating and Maintenance information presented in this manual.
Need help?
Do you have a question about the JLF-2242 and is the answer not in the manual?
Questions and answers