Page 2
GSM interface 1. Purpose or function A GSM interface has the purpose to clock by way of sending a SMS message to a mobile phone at choice. You only need a GSM interface and a SIM card. Connect the interface at the end of the antennas.
Page 3
Setup Little Bricon: Connect the clock to the antennas (no flight in the clock if you modify the settings !) On the screen of the Little you see “SMS found” press “OK”. The clock starts in training mode, got to the menu by pressing “C”. Now press Menu and chose 3 options and again point 3 SMS you can change the setup.
Page 4
Radio frequency spectrum §3 (2) Used standard: EN 300 330-2 V1.1/7.2000 Technical file is available on the seat of the manufacturer. BRICON nv, Europark Oost 15C, Sint-Niklaas, Belgium. Place and date of expenditure: Sint-Niklaas, 13-12-2005. Responsible for the manufacturer: Ivan Baetens Francis Nolmans Delegated director.