Getting Started; Step 1: Installing The System; Step 2: Connecting The System; Connecting The Speakers - Sony BDV-N590 Operating Instructions Manual

Getting Started

Step 1: Installing the
System
How to position the system
Install the system by referring to the illustration
below.
A
F
C
G
D
A Front speaker (L (left))
B Front speaker (R (right))
C Center speaker
D Surround speaker (L (left))
E Surround speaker (R (right))
F Subwoofer
G Unit
• Use caution when placing the speakers and/or
speaker stands attached to the speakers on a specially
treated (waxed, oiled, polished, etc.) floor, as staining
or discoloration may result.
• Do not lean or hang on a speaker, as it may fall down.
• The speaker of this set is not anti-magnetic. This may
result in color unevenness when it is placed near a
CRT TV or projector.
• You can install the speakers on a wall. For details,
refer to the supplied "Speaker Installation Guide."
Step 2: Connecting the
System
Do not connect the AC power cord (mains lead)
of the unit to a wall outlet (mains) until all the
other connections are made.
• When you connect another component with a volume
control, turn down the volume of the other
components to a level where sound is not distorted.

Connecting the speakers

B
Connect the speaker cords to match the color of
the SPEAKERS jacks of the unit.
When connecting to the unit, insert the
connector until it clicks.
E
Red
(Front right speaker (R))
White
(Front left speaker (L))
FRONT R
Gray
(Surround right
speaker (R))
Blue
(Surround left
speaker (L))
Purple
(Subwoofer)
Green
(Center speaker)
SPEAKERS
FRONT L SUBWOOFER CENTER SUR R SUR L
13
GB