Drainage - Haier AG10AA1TAA User Manual

Drainage

Drainage manually
1.
When water tank is full, water-full indicator is on, the unit will stop working, and buzzer will
sound 10times till water is pour off.
.
Take out water tank, pour away water
Replace the water tank, dehumidifier restarts working. Please install the water tank as the
following photo.
Note: Before putting in the water tank, please ensure the float is flexible.
Continuous drainage (optional)
2.
To connect a water pipe in the back, (inner diameter is 9mm) water can be drained continuously.
Please check if the pipe is stably connected with the drainage mouth, or water will flow out.
Note: Water pipe cannot be too long (usually 0.6m), the height cannot surpass the height of
drainage mouth, or there will be water leakage.