Do you have a question about the ARMTBLTIW and is the answer not in the manual?
Questions and answers
Summary of Contents for StarTech.com ARMTBLTIW
Page 1
Locking Security Clamp ARMTBLTIW *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/ARMTBLTIW.
Page 2
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby...
Table of Contents Package contents ...................1 Product diagram ..................2 Installation ....................2 Desk mounting ............................2 Attach a tablet ............................3 Adjust the tension of the mounting arm ..................5 Charge or sync the tablet ........................5 Specifications ..................6 Technical Support ..................7 Warranty Information ................7 Instruction Manual...
Product diagram Installation Warning: It’s the installer’s responsibility to make sure that the combined weight of all of the components doesn’t exceed the maximum 1 kg (2.2 lb) weight capacity of the mounting arm. Desk mounting 1. On the base of the desk clamp (#2), turn the hand screw to the right until the clamp has just enough space to attach to the desk or table.
Tighten the security ring on the base mount When tightened, the security ring locks the hand screw in position to prevent people from removing the tablet arm from the desk. 1. When the base mount is secured to the table, place the rounded end of the security wrench (#8) onto the security ring on the base mount.
Page 7
3. Extend each of the claws by pulling it outwards. 4. Carefully place a tablet inside of the extended claws. Note: If you’re using a thin tablet with the mounting arm, attach the included EVA cushion (#4) to the indicated circular position on the tablet mount. 5.
Adjust the tension of the mounting arm 1. Insert the 2.5 mm Allen wrench (#5) into the nut that corresponds to the hinge that you want to adjust. 2. To loosen the tension, turn the Allen wrench (#5) to the left. To increase the tension, turn the Allen wrench (#5) to the right.
2. Run the cable down the length of the mounting arm and snap the clips (#3) over the cable and onto the mounting arm to keep the cable in place. Specifications Weight capacity 1 kg (2.2 lb) Tablet size 9 to 11” Maximum thickness of the 0.79 to 2.36”...
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Page 11
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Need help?
Do you have a question about the ARMTBLTIW and is the answer not in the manual?
Questions and answers