Performance Tool W50069 Owner's Manual

Performance Tool W50069 Owner's Manual

700w shop blower

Advertisement

Quick Links

700W SHOP BLOWER
Item Number W50069
OWNER'S MANUAL
WARNING
It is the owner and/or operators' responsibility to study all WARNINGS, operating, and
maintenance instructions contained on the product label and instruction manual prior to
operation of this product. The owner/operator shall retain product instructions for future
reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning
labels and while in use, maintaining the unit in good working order. If the owner and/or operator
are not fluent in English, the product warnings and instructions shall be read and discussed with
the operators' native language by the purchaser/owner or his designee. Make sure that the
operator comprehends its contents. Safety information shall be emphasized and understood
prior to usage. The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating this
product must also be of sound mind and body and must not be under the influence of any
substance that might impair their vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W50069 and is the answer not in the manual?

Questions and answers

Summary of Contents for Performance Tool W50069

  • Page 1 700W SHOP BLOWER Item Number W50069 OWNER’S MANUAL WARNING It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this product. The owner/operator shall retain product instructions for future reference.
  • Page 2: Safety Guidelines - Definitions

    SAFETY GUIDELINES / DEFINITIONS This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information available at the time of publication.
  • Page 3: Important Safety Information

    If unreadable or missing, contact 5. Include vibration-free periods each day of work. Performance Tool® for a replacement. 6. Grip tool as lightly as possible (while still keeping safe 22. Disconnect the plug from the power source before making control of it).
  • Page 4: Parts Listing

    PARTS LISTING PARTS LIST Description Qty. Description Qty. Brush holder cover Bearing Carbon brush Handle cover Brush holder Flat washer Housing Screw Screw Down wind plate Cable clip Fan blade Cord sleeve Screw Cord Switch Up wind plate Governor Screw Bearing Label plate Spring...
  • Page 5: Specific Safety Instructions

    CONTROLS, COMPONENTS & ACCESSORIES 5. Nozzles (2 pcs) 1. Nozzle connector 6. Variable speed knob 2. Trigger 7. Carbon brush plugs 3. Trigger lock 8. Cord 4. Intake SPECIFIC SAFETY INSTRUCTIONS This electric blower is designed for blowing in and around the garage, shop or home. It can be used to remove small debris, dust, shavings, leaves, or blow dry water on a smooth surface.
  • Page 6: General Operation

    PREPARATION • Work only in daylight or good artificial light. • Avoid sucking in water or other liquids. • Always make sure that your legs stand firmly on a slope. • Walk, never run. • Pay particular attention when changing direction. •...
  • Page 7: Care And Maintenance

    CARE & MAINTENANCE 1. Unplug the power cord from main socket before any installation, adjustment, repair, cleaning or maintenance. 2. Replacement of carbon brushes. Used (shorter than 5mm), burnt or broken motor carbon brushes should be immediately replaced. Both carbon brushes should always be replaced at the same time.
  • Page 8 90 days from the date of purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL®...

Table of Contents