Maintenance - ICON Health & Fitness Image RENEW 5500 PR User Manual

You can change to a different program at any time.
The massage programs and their functions are:
LOWER BACK 1. This program offers a ten-minute
lower back massage.
UPPER BACK 2. This program offers a ten-minute
upper back massage.
WHOLE BACK 3. This program offers a ten-minute
massage of your whole back.
WHOLE BACK 4. This program offers a twenty-
minute massage of your whole back.
WHOLE BACK 5. This program offers a twenty-
minute firm massage of your whole back.
WHOLE BACK 6. This program offers a twenty-
minute hard massage of your whole back.
Note: If no buttons on the hand control are
pressed while a program is running, the massage
chair will shut off once the program is finished.
To restart the massage action, simply press the power
button on the hand control and select the desired mas-
sage option.

Maintenance

Check the massage chair periodically to make sure
that all parts are properly tightened.
If the hand control does not function properly, check
the following things:
¥ Is the power cord plugged into a 120-volt outlet?
¥ Is the power switch on the back of the chair in the
ÒONÓ position?
HOW TO USE THE RECLINE CONTROL FOR THE
BACKREST AND FOOTREST
To recline the back-
rest and raise the
footrest, simply
push the upper
recline button on
the hand control.
Lean back in the
chair until you have
reached the desired
position.
To return the chair to the upright position, push the
lower recline button until the chair back has returned
to the upright position.
¥ Is the hand control properly connected to the mas-
sage chair? (See assembly step 6 on page 7.)
The massage chair can be cleaned with a low-power
hand-held vacuum or a dry cloth. IMPORTANT: Never
use water or solvents to clean the massage chair.
11