• The unit must only be opened and/or repaired accidentally enter the unit; should this occur, by specialist staff. stop using the unit and contact OUTLINE or • For any requirements of a technical nature, specialist staff. contact OUTLINE or authorized staff.
SYSTEM DESCRIPTION The Outline NG01 is a noise generator that can be perfect companion to our new Globe Source Radiator controlled with a radio remote control. measurement kit. The device can deliver White or Pink noise with The device is powered by a USB-C cable.
4. Pairing procedure button; 9. XLR Balanced Output 5. Pink noise selected LED; The Outline NG01 is powered by simply plugging in Buttons 3 and 4 are not used. the USB-C cable (7), as you can see from the Power For better and stable performance of the output LED (2).
6. Press the button 2 on the transmitter for a few seconds; 7. Reboot the device and check for correct operation. OUTLINE S.R.L. Tel.: +39 030.3581341 www.outline.it Via Leonardo da Vinci, 56 Fax +39 030.3580431 25020 Flero (Brescia) Italy...
Up to 75 m Button Cell CR-2032 PHYSICAL Height 40 mm Width 89 mm Depth 98 mm (Without Antenna) Weight 224 g OUTLINE S.R.L. Tel.: +39 030.3581341 www.outline.it Via Leonardo da Vinci, 56 Fax +39 030.3580431 25020 Flero (Brescia) Italy info@outline.it...
Page 8
For this reason, any current Outline product may differ in some aspect from its description, but will always equal or exceed the original design specifications unless otherwise stated.
Need help?
Do you have a question about the NG01 and is the answer not in the manual?
Questions and answers