Electrical Connection - AEG FAVORIT 84470 VI Instruction Book

Aeg dishwasher user manual
Hide thumbs Also See for FAVORIT 84470 VI:
Table of Contents

Advertisement

152963030en per uk.qxp
Installation instructions

Electrical connection

If the plug that is fitted to your appliance is not suitable for the sock-
et, it must be cut off and the appropriate plug fitted.
Important!
The wires on the mains lead are coloured in accordance with the
following code:
Green and Yellow
Blue
Brown
If you fit your own plug, the colours of the wires in the mains lead of
your appliance may not correspond with the markings identifying the
terminals in your plug.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the terminal in the
plug which is marked with the letter "E" or the earth symbol
coloured green and yellow.
2. Connect the Blue (neutral) wire to the terminal in the plug which is
marked with the letter "N" or coloured black.
3. Connect the Brown (live) wire to the terminal in the plug which is
marked with the letter "L" or coloured red.
The plug moulded onto the
lead incorporates a 13amp
BSI362 fuse. Only ASTA or
BSI fuses should be used.
The plug must not be used if
the fuse cover/carrier is lost.
The cover/carrier is indicated
by the coloured insert at the
base of the product.
A replacement cover/carrier
must be obtained from your
local Service Force Centre.
This appliance must be earthed.
The manufacturer declines any responsibility should this safety
measure not be observed.
Warning!
A cut-off plug inserted into a 13amp socket is a serious safety
(shock) hazard. Ensure that the cut-off plug is disposed of safely.
44
25/03/2004
15.34
Pagina 44
-Earth
-Neutral
-Live
or

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents