Download Print this page

WilTec 61310 Operation Manual page 3

Parts washer

Advertisement

Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Modifications due to technical progress can be made by the manufacturer without advance no-
tice and may not be considered yet in this user's manual.
Before use, check the device for completeness, functionality, and tightness.
Never use a damaged or dysfunctional device. Contact the manufacturer or have the device
controlled by a qualified repairman.
Always work with care and the attention required.
Never apply excessive force when using the device.
Fill in cleaning agent up to the level marked inside the tank.
Do not use cleaning agents with a flashpoint below 65 ℃.
Only use cleaning agents on petroleum base or those being biodegradable. Only cleaning
agents approved for use in electric parts washers are permitted.
Keep children and casual bystanders away from your work zone.
Only use the parts washer in well-ventilated rooms.
Do not smoke near the device and do not operate it near sources of heat such as heaters, open
flames, and sparks.
Should the parts washer begin to burn, do not try to move it. The cover, having a melting pro-
tection, closes automatically and extinguishes the fire. Never modify in any way the cover and
do not try to fix it by hand in open position.
Only use the device with earthed mains of 230 V / 50 Hz.
Do not perform work with this product when being tired or influenced by alcohol, drugs, or med-
icine.
When performing any kind of work with the parts washer, wear a suitable protection clothing
such as safety gloves, safety shoes, safety goggles, etc.
Only keep packing material (films, plastic bags, polystyrene, etc.) out of children's, in particular
babies' reach. Packing material hold dangers that might not be visible (e.g., risk of suffocation).
Intended use
The device is appropriate for cleaning parts and assemblies of parts.
The device is not suitable for use together with any cleaning agent the flashpoint of which is
below 65 ℃.
Attention!
Maintenance
Clean the pumping unit after every single use.
Long-term contact with cleaning agents must be avoided absolutely; otherwise, the warranty
will be voided.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Do not use any nitro-cellulose combination thinner!
Item 61310
Page 3
11
2021-1

Advertisement

loading