Advertisement
Operation Manual
Industrial Vacuum Cleaner Wet Dry 1000W
62997
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Table of Contents
Related Manuals for XPOtool 62997
Summary of Contents for XPOtool 62997
- Page 1 Operation Manual Industrial Vacuum Cleaner Wet Dry 1000W 62997 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our cus - tomer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel:+49 2403 55592-0 Fax: +49 2403 55592-15 https://www.XPOtool.com Article 62997 Page 2 The Tool Experts 04 2021-1...
- Page 3 IPX4 protection is only guaranteed if an IPX4 plug is connected to the socket outlet of the • unit or the cover of the socket outlet is closed. The max. load of the socket is 2000W. • https://www.XPOtool.com Article 62997 Page 3 The Tool Experts 04 2021-1...
- Page 4 On/Off switch Vacuum tube Upper part Air inlet Filter basket Large vacuum nozzle Safety float valve Dust bag Clamp Water pipe Container Joint nozzle Vacuum hose connection Power socket Castors https://www.XPOtool.com Article 62997 Page 4 The Tool Experts 04 2021-1...
- Page 5 Nozzle overview Assembly https://www.XPOtool.com Article 62997 Page 5 The Tool Experts 04 2021-1...
- Page 6 Put the dust bag on the connection (figure 2) to vacuum dry. Connect the mains plug to the mains and turn on the switch, then the appliance starts to work • (picture 5 & 6a or 6b). https://www.XPOtool.com Article 62997 Page 6 The Tool Experts 04 2021-1...
- Page 7 Remove the foam filter (figure 3) and wash it with water (figure 5). • Important! Do not use detergents to clean the filter. The filter must be thoroughly dry be - • fore using the appliance. https://www.XPOtool.com Article 62997 Page 7 The Tool Experts 04 2021-1...
- Page 8 D-52249 Eschweiler Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions manual require the written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Article 62997 Page 8 The Tool Experts 04 2021-1...
Need help?
Do you have a question about the 62997 and is the answer not in the manual?
Questions and answers