First Time Operation Switching On The Tv And Automatically Tuning - Sony WEGA KLV-20SR3 Operating Instructions Manual

First Time Operation
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose
the language of the menu screen 2) choose the country in which you are going to operate the TV, 3) search and
store all available channels (TV Broadcast) and 4) change the order in which the channels (TV Broadcast)
appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate
option in the (Set Up menu) or by pressing and holding the Auto Start Up button
for more than three seconds, see page 17.
1
Connect the TV plug to the mains socket (220-240V
AC, 50Hz).
2
The first time that the TV set is connected, it is usually
turned on. If the TV is off, press the
turn on the TV.
The first time you switch on the TV, a Language menu
appears automatically on the TV screen.
3
Press the
language, then press the OK button to confirm your selection. From
now on all the menus will appear in your chosen language.
4
The Country menu appears automatically. Press the
to select the country in which you are using the TV. Press the OK
button to confirm your selection.
22
First Time Operation
V v B b
, , or buttons on the remote control to select your
• If the country in which you want to use the TV set does not
appear in the list, select "-" instead of a country.
• To avoid wrong teletext characters for cyrillic languages we
recommend selecting Russia if your own country does not
appear in the list.
on/off button to
v V
or button
on the top of TV set
Country
Select country
United Kingdom
Ireland
Nederland
België/Belgique
Luxembourg
France
Italia
Schweiz/Suisse/Svizzera
Deutschland
Österreich