Tarot ZYX-BD Quick Start Manual

1

Quick Start

Attentions!
! For Tarot ZYX-M Flight Control System.
Charging
Connect the USB port and charger
with Mirco-USB cable.
4-1
Ground
Part
2

Introduction of Ground Part

Power LED
Status LED
USB Port
3

Introduction of Sky Part

1
Ground
Part
PMU-5V
LED/OSD
Connect to Flight Controller
Use Connection Cable to connect
Flight Controller and the Sky Part
of ZYX-BD.
4-2
Sky Part
Binding
Button
Power Button
Binding
Button
Sky Part
DATA / USB GIMBAL
AUX1

Initial Bind

Press the binding button on Sky Part over 1s, and poke the binding button
inside the Ground Part.
Observe the Status LED on the Ground Part：
Blue LED blinks fast, binding；
Blue LED blinks slowly, bind finishes.
Antenna
Status LED
Bluetooth Datalink
2
Turn On / Off
Press the button for 1s and then
press it for over 3s.
P ow er LE D
Status
4 LEDs On
3 LEDs On
2 LEDs On
1 LED On
1 LED blinks
S tatu s LED
Status
Blue LED On
Blue LED blinks fast
Blue LED blinks slowly
S tatu s LED
Status
Blue LED On
Blue LED blinks fast
Blue LED blinks slowly
ZYX-BD
3
Ground Part
Battery
75%-100%
50%-75%
25%-50%
10-25%
0-10%
Connection
Binding
Disconnection
Connection
Binding
Disconnection