LG 27MP500 Manual page 5

Installing on a Table
•
Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm away from
the wall to ensure sufficient ventilation.
100 mm
CAUTION
• Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
•
Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•
If you need another power cord, please contact your local dealer or the nearest retail store.
100 mm
100 mm
100 mm
Adjusting the Angle
1
Place the monitor mounted on the stand base in an upright position.
2
Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing
experience.
WARNING
•
To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor' s frame as
illustrated below.
•
Be careful not to touch or press the screen area when adjusting the angle of the monitor.
5