OneAudio ONEmicro Operation Manual

Speaker key operation manual for ONEmicro, ONEmini, ONEmedi
When the speaker is in standby mode (non-playing, blue LED is on), you can enter speaker menu by holding
[+] key for 2 second.
A. Change speaker volume (control speaker group volume):
When speaker is playing music (play mode), press [+] and [-] key to change volume
: volume up
: volume down
B. Check speaker battery level
You can hear the speaker battery level and speaker setting in the "Report Status" menu at first page. A
voice prompt will report : battery level, position, connection status, sound character, tweeter gain, left
right balance and power mode. If speaker battery level is lower than 20%, battery level will automatically
report at every time speaker is turned on.
Change speaker connection to transmitter
C.
Each speaker can pair up to 3 transmitters. If your speakers have been paired with more than 1 transmitter, the
"Change Connection" menu can help you to switch your speaker connection. Set to 'auto' the speaker will search
available transmitter automatically or set to manual connection to particular transmitter.
Tips : Don't power on 2 transmitters at the same time if speaker search mode is set to 'auto'.
D. Set power mode
Power Sound quality
mode
Auto
ECO Standard
Standby
Charging
* ECO mode : offers ~25% longer play time, ONEmedi is not support
* Standby mode : ONEmicro is not support
Press and hold both [+] and [-] for 2 seconds to reset
speaker pair volume to default level
Connected to transmitter
HQ Auto power off when it
has idled for 15 min
HQ Always stay on
HQ Always stay on
Power management
Transmitter power off, speaker in searching
Auto power off when it has lost transmitter
connection for 5 min
Always in searching transmitter