Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for audiophony COMPACT500
Summary of Contents for audiophony COMPACT500
- Page 1 USER GUIDE 10302 - January 2015 Version 1.0...
-
Page 2: Important Safety Information
English COMPACT500 - Amplified system with subwoofer and satellites -500W 1 - Safety information Important safety information This unit is intended for indoor use only. Do not use it in a wet, or extremely cold/hot locations. Failure to follow these safety ins-... -
Page 3: Technical Specifications
English COMPACT500 - Amplified system with subwoofer and satellites -500W 2 - Technical specifications SATELLITE Power 80W RMS - 160W max Frequency response 155Hz -22KHz Sensitivity(1W@1m) 93 dB Max. SPL (@1m) 120 dB Nominal impedance 8 Ohms Boomer 4.75'' Tweeter 1"... - Page 4 English COMPACT500 - Amplified system with subwoofer and satellites -500W 3 - Presentation 3-1 Overview A - Command panel B - Satellites compartment C - Power supply and sattelites connectors zone D - Transport handle E - Male audio contact slot...
- Page 5 Right selector: Mono mode, the left output only is active and the two satellites are linked together to focus their power on one single side. In this mode, a second COMPACT500 sound system can be connected to the output No. 5 to double the power output.
- Page 6 English COMPACT500 - Amplified system with subwoofer and satellites -500W 7- Line output mode Allows you to choose the signal injected to the outputs No. 4. Left selector: The Line Out output only transmits the CH2 signal. Right selector: The whole signal is transmitted from the system to the Line Out outputs.
-
Page 7: Using A Speaker Stand
- Tighten the clamping knobs properly before turning the speakers on. 4.2 - Setting up two satellites together The COMPACT500 satellites are equipped with male and female contact slots allowing them to be daisy-chained. This slot guarantees the transmission of the audio signal between the two satellites and the mechanical connection. - Page 8 The drawing opposite describes speakers mounted above the subwoofer. The COMPACT500 satellites can also be pole-mounted above the subwoofer thanks to the upper part of one of the supplied speaker stands. The bar must be inserted into the 25 mm mounting plate of the subwoofer and into the 18 mm mounting plate of the lower satellite.
- Page 9 COMPACT500 - Amplified system with subwoofer and satellites -500W 5 - Basical wiring 5.1 - Using the COMPACT500 as 2.1 system: The COMPACT500 system can be used, for instance, for a guitar player-singer with soundtrack. To do so, proceed as follows: - The microphone will be plugged to the CH1 combo input via XLR socket, the selector will be in MIC position.
- Page 10 Two COMPACT500 systems can be combined together to increase the sound diffusion and the number of inputs. In this example, the two COMPACT500 systems is used by a small formation of two guitarists and singers, a keyboard and the percussions.
- Page 11 English COMPACT500 - Amplified system with subwoofer and satellites -500W 6 - Dimensions Page 11...
- Page 12 That is why technical specifications and the products physical configuration might differ from the illustrations. ® Make sure you get the latest news and updates about the AUDIOPHONY products on www.audiophony.com AUDIOPHONY ®...
Need help?
Do you have a question about the COMPACT500 and is the answer not in the manual?
Questions and answers