Cefndy X700 User Instruction

None-marking rubber legs
1. Introduction
The X700 is a complementary product to the Bariatric High Back Chair. Its easy clean upholstery provides for
longevity of service and the top is made from high density deep foam for ultimate comfort. The none-marking rubber
legs with give you secure positioning. This is designed for the use of supporting legs whilst sitting in a chair – not for
sitting on or any other use.
Upholstery length
Upholstery width
Upholstery depth
Stool height (from-to)
2. Contents of the Box
Wide Footstool (X700)
•
Extended Legs & Pin Clips
•
User Instructions (this leaflet)
•
3. Assembly Instructions
Carefully unpack and examine the product to ensure it is complete.
•
Before use check for any signs of damage e.g. cracked weld, flaking of paint, bent tube. If any signs occur
•
please contact your supplier to exchange and refrain from using the product. DO NOT ATTEMPT TO USE
IF PRODUCT IS DAMAGED.
4. Correct Use
Height Adjustment:
Remove the pin clip from the leg.
•
Move the extended leg piece up or down to the required location (adjustable in increments of 25mm).
•
Push the pin clip back in ensuring it firmly locates in both the leg and the extended leg piece.
•
Ref: X700June2010
Form No: Cef 0035
User Instruction for the Wide Foot Stool (Brown)
Product Dimensions
480mm
440mm
120mm
430mm-500mm
X700
Wide Foot Stool X700