Table of Contents
Advertisement
3 release the "on-hook" switch or pick up the handset and listen for a dial tone.
4 continue this process until you hear a dial tone and the microphone
is functional. once you have located the proper setting, make a note
of it in the event it is changed accidentally or you use your IL95 on a
different phone.
NOTE: The IL95 cannot be used on any telephone where the keypad is located in
the handset.
If, after installing your IL95 amplifier, you do not have a dial tone or the person you called
cannot hear you, take the following steps:
1 check that all connections are plugged in properly
2 Make sure power is connected
3 Either disconnect the unit or use another phone and check that your
phone service is working properly.
4 change the compatibility setting dial located on the bottom of the unit.
Troubleshooting
6 – ENGLISH
Advertisement
Table of Contents
