Aims & Content Content : User Manual / User Guide FCC Statement Label of End Product User Manual of End Product Overiew Functional Block Diagram Technical Description Circuit Schematics PCB Layout & Component Layouts Part List...
> S8 VBUS Test > S9 OFF > Power Source (Banana Plug) : 4.5V DC ! : Connection Socket Position Li Seng Bluetooth Adaptor Mother Board Tx / Rx BLE Module Board nRF6310 x1 Cable x1 LSN8001 x2 nRF2735 x1...
Page 4
Finished Assembly 3) Connect “Tx/Rx cable” 4) Connect “Tx/Rx cable” 2) Place the “Li Seng Bluetooth 1) Place the “Adaptor Board nRF2735” BLE Module LSN8001” “Li Seng Bluetooth BLE “Mother Board nRF6310” Module LSN8001” “Adaptor Board nRF2735” “Mother Board nRF 6310”...
Page 5
User Manual / User Guide (3/4) Installation : 5) Connect Power Source by 6) Power On the Unit by “Banana Plug” 4.5V DC Power ON Silde Switch S9 (Beware of + & - ) Power OFF the unit by Switch OFF The Unit is Ready the Slide Switch S9 after Testing for Testing...
Page 6
User Manual / User Guide (4/4) Direct Test Mode : The DTM RS232 interface : Baud Rate : 192000 Number of data bits : 8 No Parity 1 Stop bit No flow control (meaning no RTS/CTS)
FCC statement : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The final end product must be labeled in a visible area with the following " Contains TX FCC ID: RR3-LSN8001 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules.
Page 9
Overview LSN8001 Module Apply to Bluetooth Low Energy (4.0) as Bluetooth Smart.
Page 10
Electrical Data Reference of LSN8001 Module LSN8001 Module Supply Power : 1.9V to 3.6 V DC LSN8001...
Part List Bill of material PCB: LSN8001 Version: Quanti Farnell part Designator Value Footprint Description Comment Digi-Key part number number C1, C2, C13, C14 15pF 0402s Capacitor NP0 +/- 2% 2.2nF 0402s Capacitor X7R +/- 10% 0402s Capacitor Not mounted 1.8pF...
Page 14
Thank You ~! Further contact : Danny Tsang danny@liseng.com.hk Hong Kong office: Address: 9/F, Shiu Fung Hong Building, 239-241 Wing Lok Street, Sheung Wan, Hong Kong Cellphone : (852) 9430-7943 Main : (852) 2540-8348 Fax : (852) 2547-5706 2013/1/7...