Green-Qube Quick-Qube QQ1224 Assembly Instructions

Quick-Qube Assembly Instructions
1.
Drag the frame outwards so it is fully
extended and you hear a 'click'.
QQ1224 & QQ1530
2. Next add the top hanging bars, you will have a
combination of:
 Hanging Bars
 Outer Support Poles
 Cross Support Poles
See below diagrams for the set up for your Quick-Qube
For each Outer Support Pole insert the crook end into the central
slot. Then match the hole at the other end of the Outer Support
Pole to the hole in the corner of the frame. Use one of the screws
to fix into place.
Slot each of the crooks of each Cross Support Pole into the central
and side slots. Finally Add the hanging bars in position.
QQ2030
(not applicable for QQ1224 & QQ1530)
QQ200, QQ240 & QQ30