Table of Contents
Advertisement
Quick Links
Porto-Power Blackhawk Automotive is a licensed trademark
Pulling Post Kit
Operating Instructions & Parts Manual
Model Number B93601A
Items included:
B93600A • 10 Ton Pulling Post
B65428 • Air Pump with Hose
B65444 • 10 Ton 10" Stroke Ram
B97662 • Chain & Craw Hooks (2pc.)
B97691 • Chain & Grab Hook
SFA Companies ©2005
10939 N. Pomona Ave. Kansas City, MO 64153
816-891-6390
sales@blackhawk-automotive.com
- Before using this product, read this manual and follow all its Safety Rules and Operating Instructions
Made in USA
Advertisement
Table of Contents
Related Manuals for Porto-Power Blackhawk Automotive B93601A
Summary of Contents for Porto-Power Blackhawk Automotive B93601A
- Page 1 Porto-Power Blackhawk Automotive is a licensed trademark Pulling Post Kit Operating Instructions & Parts Manual Model Number B93601A Items included: B93600A • 10 Ton Pulling Post B65428 • Air Pump with Hose B65444 • 10 Ton 10" Stroke Ram B97662 • Chain & Craw Hooks (2pc.) B97691 •...
- Page 2 TIME LIMITED WARRANTY For the periods of time indicated below, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy.
-
Page 3: Product Description
PRODUCT DESCRIPTION Porto-Power Pulling Post Kit is designed for rated capacity lifting and pulling jobs. This kit includes a pulling post frame (B93600A), a 10,000 psi air pump with hose (B65428), a 10 ton 10 inch stroke threaded ram (B65444), a 9 feet chain with grab hook (B97691), and two 6 feet chain with two craw hooks (B97662). -
Page 4: Safety Instructions
WARNING • If oil leakage is detected, discontinue use of the ram immediately and contact your nearest Porto-Power Blackhawk Automotive Authorized Service Center. The ram could develop excessive pressure and cause the ram, hose or coupler to burst which could cause serious injury or death. - Page 5 WARNING WARNING • All WARNING statements must be carefully observed Hydraulic Hoses and Fluid Transmission Lines to help prevent personal injury. • Never operate pump with release valve closed and • Do not exceed rated capacity. disconnected from application. If operated in this •...
-
Page 6: Operation
SET UP (refer to figure 1 on page 4) Safety Mesage! It is recommended that you install a pressure gauge on your pump to indicate a relative level of pulling force. 1. Secure the threaded ram to bottom of puller post, then connect ram to air pump with hydraulic hose provided. 2. -
Page 7: Maintenance
MAINTENANCE 1. Inpect and replace damaged, kinked, twisted, stretched or rusty chain. 2. Inspect hoses and connections. Replace damage components immediately with Porto-Power Blackhawk replacement parts only. 3. Tighten connections as needed. Use non-hardening pipe thread compound when servicing connections. -
Page 8: Replacement Parts
REPLACEMENT PARTS Please refer to the Parts drawing when ordering parts. Not all components are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give model no., serial no. and description below. Call or write for current pricing: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A.
Need help?
Do you have a question about the Blackhawk Automotive B93601A and is the answer not in the manual?
Questions and answers