Table of Contents
Advertisement
CAMERA VIEW
Before installing the camera, test the device to make sure that position
is suitable. Check the correct signal reception. If necessary, move the
camera to improve reception.
www.PyleUSA.com
1 Light sensor
2 Camera lens
3 Infrared LEDs
4 Power LED
5 Microphone
6 Loudspeaker
7 Paring key
8 Key power on/off
9 Temperature sensor
10 Power connector
Connect the camera power to
the transformer supplied. The
blue LED turns on to indicate
that it is running.
3
Advertisement
Table of Contents
